Polymer products



Detailed product search

 - 
 - 

HDPE

Medium- and High-density  Polyethylene (MDPE and HDPE)

Tipelin is a registered trade mark for medium and high density polyethylene grades manufactured by MOL Petrochemicals Co. Ltd.

MOL Petrochemicals unimodal medium and high-density TIPELIN grades (MDPE and HDPE) are produced by continuous suspension polymerisation using low pressure catalytic process under license of Phillips Petroleum Co. The density range of homopolymers and copolymers produced with hexene-1 comonomer grades is 934 - 961 kg/m3

The bimodal high density TIPELIN types are produced by CX Process under license of Mitsui (as well as some of the unimodal polyethylene grade). This slurry phase polymerization employing a super-high-activity catalyst and a two-reactor system. (The density range of copolymer grades produced with butene-1 comonomer is 948 - 958 kg/m3.)

The wide range of grades and the careful selection of characteristics of the individual grades allow various applications including:

  • Blown film grades for heavy duty bags, industrial bags, shopping bags, garbage bags and packaging films for medicines and foods;
  • Blow moulding grades to manufacture household plastic products, bottles and cans for foods including oils, soft drink extracts, dairy products and large capacity barrels for household or industrial chemicals, and corrugated pipes;
  • Pipe grades for corrugated and protective pipes, steel pipe coating;
  • Sheet extrusion grades  for sheets and thermoformed sheets.
  • Injection moulding grades for houseware and industrial packaging, consumer goods.
  • Split film yarn for agricultural packaging (raschel bag, round bale net). 

Most TIPELIN grades satisfy the regulations applied by the European countries (EEC). Because several European countries apply restrictive regulations for the allowed migration values of additives in packaging material in contact with food, it is recommended that customers contact MOL Petrochemicals for special information.

For Material Safety Datasheets concerning every TIPELIN products click here!

Product Melt Flow Rate (MFR)
g/10 min*
Density
kg/m3 (23°C)
Proposed processing type Technical data sheet (TDS) Declaration data sheet (DDS)
TIPELIN 7700M 0.06 948 Extrusion Technical data sheet (TDS) DDS
TIPELIN 7000F 0.08 955 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN 7500F 0.10 952 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN BS 520-14 0.10 952 Blow moulding Technical data sheet (TDS) DDS
TIPELIN 7300B 0.10 954 Blow moulding Technical data sheet (TDS) DDS
TIPELIN 7111S 0.12 949 Extrusion Technical data sheet (TDS) DDS
TIPELIN FS 340-03 0.17 935 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN FS 383-03 0.18 938 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN FS 471-02 0.18 946 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN BS 501-17 0.18 950 Blow moulding Technical data sheet (TDS) DDS
TIPELIN FA 381-10 0.28 938 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN 6000B 0.30 958 Blow moulding Technical data sheet (TDS) DDS
TIPELIN 6010B 0.30 958 Blow moulding Technical data sheet (TDS) DDS
TIPELIN 6300B 0.30 954 Blow moulding Technical data sheet (TDS) DDS
TIPELIN BA 550-13 0.35 954 Blow moulding Technical data sheet (TDS) DDS
TIPELIN BB 620-17 0.65 962 Blow moulding Technical data sheet (TDS) DDS
TIPELIN 5700S 0.50 947 Extrusion Technical data sheet (TDS) DDS
TIPELIN FB 472-02 0.69 947 Extrusion, Blown film Technical data sheet (TDS) DDS
TIPELIN 1100J 8.0 961 Injection moulding Technical data sheet (TDS) DDS
TIPELIN 1108J 8.0 961 Injection moulding Technical data sheet (TDS) DDS
*: at 190 °C and 2.16 kg

You may also be interested in